Making a Stering Key Chain Tips
Make a Key String
Yongle international -String key chains are simple, durable, colorful and useful. Can be made with leftover pieces of string or thread embroidery, what a good project to use up odds and ends in his study of art. Unlike other key chains can be heavy and bulky, chain key chain is lightweight and simple. They are also a good way to differentiate and organize your keys. You can make small chain keychains specific colors that correspond to certain keys to avoid the time and frustration spent fishing the correct key. www.stylesupplier.com
Yongle international -Things we have to prepare
Metal keychain
Pin
6 lengths of 27 inches of rope (or thread embroidery thread works best) www.stylesupplier.com
Yongle international -Open the safety pin and slide the key ring metal pin or needle. Close the safety pin for the key ring hanging from it. www.stylesupplier.com
Yongle international -Measure and cut the string. Each chain will serve two lengths key chain because it will be folded in half. Six channels are being used in this design to add durability. For example, if you want your keychain to be colored red and white, which would measure three strings red and three white lines, each 27 inches, to six parts needed. www.stylesupplier.com
Yongle international -Fasten your safety pin to your pants, just above the knee, or you can put a pillow on your lap. Gather all your strings and pull through the key string. Meet both sets of ends and pull strings to have the center of each strip against the chain keychain. www.stylesupplier.com
Yongle international -Just below the ring, all the strings together and knot. You now have what looks like a ring with a long tassel even six strings. www.stylesupplier.com
Yongle international -Start your knots. Take two strings and move the other four aside. Make a shape like the number 4 with the first two strings in the first string is the message, or back of the 4 and the second channel causes the bottom of the triangle 4. Take the remaining part of the second string and pull it in the first and the opening created by making your number 4. Make this knot twice, then move on. www.stylesupplier.com
Yongle international -Repeat step 5 using the second and third string to create two knots. Then repeat step 5 strings 3 and 4, then 4 and 5, then 5 and 6. This completes an entire segment of your keychain. Repeat the nodes in that order until the end of the ropes until the key string is the time you would like. www.stylesupplier.com
Yongle international -Gather up the ends of the key chain and make a knot to complete your key ring. Release the safety latch and pull the ripcord. The keychain is ready to add to your keys.www.stylesupplier.com
No comments:
Post a Comment